This website is maintained by SF Innovations Ltd, 9 The Pastures, York, YO24 2JE.  

Contact sales@sf-innovations.co.uk if you have any queries.

Home.EuroRack.Home Automation.Custard Pi.Resources.Kits.

Sign up for e-mail alerts

Follow us on Facebook

 

sales@sf-innovations.co.uk

Terms and Conditions of Sale

Shipping costs and options outside the UK

 SF Innovations - Innovators in Electronics

Electronic Projects for the Raspberry Pi

 

Kit 1 – Interfacing to LED displays, speakers and simple sensors

 

This kit enables users of the Raspberry Pi to control external electronics. The projects are listed below. The build instructions are available at the link provided. There are also links to the Python code.

 

This kit assumes some basic knowledge about the Raspberry Pi. Below are some links that will be useful to absolute beginners.

 

         Rpi Basics             Using Python             RPi GPIO           Prototyping Breadboard

 

Project  1 – Bi-colour LED: In this project we are going to flash a Bi-Colour Red/Green LED using 2 of the outputs of the Raspberry Pi. INSTRUCTIONS & CODE

 

Project  2 – Driving a 7-Segment Display: In this project we are going to connect a 7-segment display to the Raspberry Pi GPIO and use it to show digits 0 to 9.  INSTRUCTIONS & CODE

 

Project  3 – Electronic Dice: This project uses a switch to implement an electronic dice using the 7-segment display from the previous project. INSTRUCTIONS & CODE

 

Project  4 – Driving a tri-colour LED: In this project we are going to drive a tri-colour Red/Green/Blue (RGB) LED and control the brightness of each of the colours from the keyboard. INSTRUCTIONS & CODE

 

Project  5 – Flashing 4 colour LEDs: Visually, this is a fun project where we flash  red, green, yellow and blue LEDs. INSTRUCTIONS & CODE

 

Project  6 – Warning Light for Bike: The program will flash the 4 LEDs at a faster rate whenever light is detected. INSTRUCTIONS & CODE

 

Project  7 – Raspberry Pi Musical Keyboard: This project uses the Raspberry Pi GPIO to generate various musical notes. The RPi keyboard is used to generate the different notes. INSTRUCTIONS & CODE

 

Project  8 – RPi Tunes: We are going to get the RPi to play a pre-programmed tune. INSTRUCTIONS & CODE

 

Project  9 – Moisture Alarm: In this project we are going to use a moisture sensor and raise an alert using the speaker when it is wet. INSTRUCTIONS & CODE

 

Project 10 – Intruder E-Mail alert: In this project we are going to use the RPi to detect when a door is opened and send an e-mail. INSTRUCTIONS & CODE

  

 

 

 

 

 

Electronic Projects for the Raspberry Pi

Kit 1

Interfacing to LED displays, speakers and simple sensors

 

£11.00

Add Rpi Kit 1 - SF to cart