SF Innovations

Modules for the Raspberry Pi and Home Automation

This website is maintained by SF Innovations Ltd, 9 The Pastures, York, YO24 2JE.  

Contact sales@sf-innovations.co.uk if you have any queries.

Home.Home Automation.Custard Pi.Resources.Kits.

Sign up for e-mail alerts

Custard Pi range of accessories for the Raspberry Pi

Follow us on Facebook

 

sales@sf-innovations.co.uk

Terms and Conditions of Sale

Please e-mail for carriage costs outside Europe

Custard Pi 8 - SMT and through hole prototyping board

 

Use of SMT or surface mounted technology results in much smaller electronic assemblies. It also allows fully automated production..

 

However SMT is normally a headache  for engineers wanting to quickly prototype a circuit. Most of the prototyping options available are for through hole components. There are adaptor boards that will allow an engineer to try out a SMT integrated circuit but they are limited in scope.

 

The Custard Pi 8 solves this problem by providing a number of pads for SMT devices and bringing them out to plated through holes so that the engineer can wire to these easily. This 80mm x 72mm PCB provides the following:

 

* 160 point through hole prototyping area with 4 power rails whcih can take upto a 20 pin DIP IC

* 2 x 13 way connector that can be sued to link upto the Raspberry Pi GPIO if required

* Breakout pads for SMT IC that can take a narrow body (0.15 inch) or wide body (0.3 inch) with up to 16 pins

* Breakout pads for SMT IC that can take narrow body (0.15 inch) with upto 16 pins and wide body (0.3 inch) with upto 20 pins

* Breakout pads for 7 x 1206, 8 x 0603 and 9 x 0805 devices

* Pads for 4 SOT-23 devices

* Pads for 1 SOT 223 and 1 DPAK (TO252) device

 

 

 

 

 

Custard Pi 8

2 x Bare boards

£4.50

Add 2 x Custard Pi 8 - BB SF to cart
Custard Pi 8 - SMT and through hole prototyping board